Pear juice making machine with crusher function juicer machine carrot juice extractor

Juice extractor, Pear juice making machine with crusher function juicer machine carrot juice extractor.

One. Technical parameters: 

Model: PLZ-0.5

Capacity:400-500kg/h

Size: 1250*350*1450mm

Net weight: 120kg

Gross Weight: 150kg

Power: 1.5kw

Voltage: 380V, 50Hz, 3 phase

Package: wooden case

 

Two. Function& application range

 

Used to press tomato, pineapple, apple, orange and other fruits and vegetables.

 

Three. Technical parameters:

 

1. Fruits capacity: 0.1-0.5T/h

2. Screw diameter: Φ80mm

3.Rotation speed: crusher: 1000r.p.m

screw juice machine: 380r.p.m

4. Filter gap: 0.6mm

5. Motor: Crusher: 0.75kw  

screw juice machine: 1.5kw

6. Size: 980*380*1100mm

 

Four. Equipment structure& working principle

1.     Structure

 

Crusher：The crusher is composed of feeding hopper, blade, filter and main machine body.

 

Screw juice machine：It is composed of front holder, feeding hopper, screw, filter, juice container, back holder and slag trough, etc. and the left part of screw shaft supported inside the bearing seat and right part supported inside the hand wheel bearing seat. The motor pulley driven by V-belt and drive the screw works.

2.     Working Principle

 

Crusher：the material is crushed by the high speed rotation blade.

 

Screw juice machine:

 

Its main parts is the screw. The bottom diameter of the screw increase while the pitch decrease along the slag discharging direction view. When the material is pushed forward by the screw, the cavity volume decrease and press the material.

 

The rotation direction of the screw shaft as viewed from the hopper to the slag trough direction is clockwise.

 

When the raw material feed into the hopper, it is pressed by the screw and juice is flowed into the juice container through the filter. And the slag is discharged through the annular gap between the screw and the tapered portion of the discharge regulator, the regulator the right to move the head axially resize void.

 

For Clockwise：

 

Turn the hand wheel bearing and view from slag trough to the feeding hopper, when the pressure regulator is head to the left, the gad is narrowing, otherwise the gap becomes larger. Change the size of the gap can adjust the slag discharging rate. However if the gap is too small, part of the slag particles will be discharged out along with the juice through the filter while the strong squeezing. Although the juice yield rate increases, but the quality decreases. The gap can be adjusted according to customer process requirement.

 

Welcome to send inquiry on Pear juice making machine with crusher function juicer machine carrot juice extractor.