1.5L single punch pill tablet press machine
Tablet press machine, which can compress granular raw materials into tablet and pill.
Usage and Characteristics
TP-1.5L Single Punch Tablet Press can compress granular raw materials into tablets. It can be widely used in pharmaceutical, chemical plants, food factories, hospitals, research institutes, laboratory trial production and small batch production.
This model is excellent performance, adaptability, easy to use, easy to maintain, small size, light weight, can also be hand crank when no electricity. The machine is only loaded with a die, the depth of filling material, tablet thickness can be adjusted to adapt to the pharmaceutical industry to suppress a variety of Chinese and Western tablets and other industries to suppress the requirements of a variety of similar products, User's welcome from the vast majority of industries.
Two, Technical parameters
|
Model |
TP-1.5L |
TP-5 |
TP-6 |
|
Machine materials |
Aluminum alloy |
Iron |
Iron |
|
Max press pressure(kn) |
15 |
50 |
60 |
|
Max press diameter(mm) |
12 |
18 |
24 |
|
Filling depth(mm) |
11 |
16 |
18 |
|
Output(pc/h) |
4000-6000 |
4000-6000 |
3000 |
|
Power(w) |
370 |
750 |
750 |
|
Rotation speed of motor(r/min) |
1400 |
1400 |
1400 |
|
Weight(kg) |
40 |
128 |
165 |
|
Size(mm)(L×C×H) |
530*360*590 |
650*440*650 |
750*380*695 |
Three, Installation and Trial Run Test
1, The tablet press is installed in a solid wooden workbench (also can be installed on the cement stage) with three pairs of M12 anchor screws. The height of the countertop to the ground is about 600 mm (easy to operate by hand for the degree).
In order to disassemble and repair easily, it should also have a hole about 35 mm in diameter on the wood workbench that the position is corresponding to the core rod.
2, Connecting the motor to ground wire before connecting the motor electricity to confirm safety. Then remove the V-belt, turn on the motor power, start the motor to observe the motor rotation direction is correct (The rotation direction of motor shaft should be the same with the direction of the arrow shown on the gear protection cover), if the rotation direction is wrong, then another wiring, and then install the V-belt well.
It is the hot sale product, welcome to send inquiry on tablet press machine.