
Sunflower oil making machine, 100T continuous sunflower oil making machine. The main introduction of most equipment in the production is as follows:
TQSF series Specific gravity de-stoner: The material can be classified as two parts which are heavy and light, and the stone can be removed continuously from the raw material at the same time. Equipped with two layer of sifts and exhaust system. The above layer can be used to separate light and heavy materials, the under layer sift separate the glass, stone, metal and others in the heavy material from the main stream.
Cleaning: In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power and exhaust system were used to remove iron. Dust removing wind net is installed.
Shelling process: The shelling machine is important for sunflower, because the husk of sunflower seeds contains certain wax, which is bad for health, also not affect the color and quality of sunflower oil, so it is necessary to separate the wax from sunflower oil.
Crushing process:In order to ensure good softening and embryo-rolling effect, soy is generally broken up uniformly to 4~6 flakes, so water distribute uniformly during softening, and billet is thin and burliness.
Softening or conditioning: During soy softening, the flake is not only thin,uniform and toughness in favor of extraction, but also can make crude oil contain little no-hydration Lecithin convenient for de-lecithin and physical refining of salad oil.
Embryo-rolling process: embryo-rolling means a certainty granularity of soy lamella was prepared for flakes of about 0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%.
Flaking: Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material can be extracted in the shortest time and maximum, and residual oil was less than 1%.
The whole workshop layout reasonable, materials technology route simple and direct.
After the pre-press workshop, the cake will be sent to aother workshop by conveyor if the users want to get more oil. So the solvwnt extraction equipment is necessary. Besides, if the user wants to sell oil on the super market, the oil refinery is also important and necessary.
The sunflower oil contains some wax, so it the dewaxing equipment is also needed, the wax is mainly from the husk of sunflower seed. The was can make the oil unclear, and not good for health, so it is better to remove the wax from sunflower oil.
Production time: 50 days
Installation time: 80 days
Containers: It needs 8*40HQ to load all the equiments.
After-sale service: After you purchased the sunflower oil making machine production line, we can send the technicians to your plant for instructing the installation and tiral run for Soybean crushing machine oil mill plant. Besides, we will be in charge of visa application and air tickets cost, but you should pay the salary for each technician.
Welcome to further questions, please feel free to contact us if you are interested in 100T continuous sunflower oil making machine.